Portable wheel washing system T series

RC closed circuit automatic wheel washing systems are manufactured by following the most modern features of “Object” logic.

They are extremely reliable, fully modular and they can be adapted to the different requirements of every construction site.

Thanks to their closed loop, wheel washing systems RC series can reach water recycling percentages higher than 95% (depending on setting and working conditions).

The use of RC wheel washing systems helps preserving the environment and it will ensure maximum return on investment over the long term.

The system RC T is designed to be used in temporary construction facilities where there are vehicles with low percentages of mud on the tires.
The particular features of this system are portability, ease of installation and the possibility of using it both underground and surface.

This system can be equipped on option with modules able to reduce specific pollutants as Asbestos, hydrocarbons, particles, etc.

Portable wheel washing system T2 series

Fields of application

Construction sites, storage sites, recycling plants, landfills, demolition sites, reclaimed lands, municipal enterprises, sanitation plants, etc.

Index (scale 1-10)

Portability: 10 (transportable on standard van)
Ease of installation: 10 (no need of installation)
Vehicles contamination: 5 (dust and topsoil)
Vehicle flow: 2 (up to 20 vehicles per hour)

Specific features of model T2

Placement: underground and surface
Vehicles: vans, trucks, wheeled industrial vehicles
Passage of vehicles: low-speed, drive-through
Max. weight of vehicles: 70 ton
Min. height of vehicles: 10 cm
Average washing time: 30 sec.
Tank: integrated
Settling tank: available as option (it includes mud extractor
Water purification: available as option
Dosing system for additives: available as option

Standard technical features

Washing line structure:  heavy carpentry in carbon steel, galvanized if necessary
Internal width: 3,2 mt
Internal length: 2 m
Demounted system dims: 5x2x0.6 mt
Line height from ground: around60 cm
Sidewalls height: 1,3 mt from washing line
Washing pumps: 1
Washing flow: 1.500 l/min
Power: 5 Kw
Settling tank: integrated
Integrated tanks volume: 5.000 liters
Mud extractor: not present
Activation: automatic with sensors, no wind sensitive

Available optionals

• Settling tank with mud extractor (from 16 to 40 m³)  • Polyelectrolyte dosing group with integrated tank  • Automatic water refill  • Auxiliary tank for mud storage  • Mud dewatering system  • Upwards and downwards ramps  • Specific system for reducing pollutants  • Orientable nozzles  • Rotating flow nozzles
Back wash injectors  • Low, up and side wash injectors  • Sanitation and bacterial control  • Extra thin autocleaning filter  • Heating system  • Telemetry and telecontrol  • Current generator

Portable wheel washing system T4 series

Fields of application:

Construction sites, storage sites, recycling plants, landfills, demolition sites, reclaimed lands, municipal enterprises, sanitation plants, etc.

Index (scale 1- 10):

Portability: 8 (transportable on standard van)
Ease of installation: 8 (it can be installed by non-specialized workforce)
Vehicles contamination: 5 (dust and topsoil)
Vehicle flow: 3 (up to 30 vehicles per hour)

Specific features of model T4

Placement: underground and surface
Vehicles: vans, trucks, wheeled industrial vehicles
Passage of vehicles: low speed, drive-through
Max. weight of vehicles: 70 tons
Min. height of vehicles: 10 cm
Average washing time: 20 sec.
Tanks: Integrated
Settling tank: Available as option (it includes mud extractor)
Water purification: Available as option
Dosing system for additives: Available as option

Standard technical features:

Washing line structure: heavy carpentry in c. steel, galvanized where needed
Internal widht: 3,2 mt
Internal length: 4,0 mt
Demounted system dims: 4x1,5x1,5 mt
Line height from ground: about 60 cm
Sidewalls height: 1,3 mt from washing line
Nozzles number: 104
Washing pumps: from 1 to 2
Washing flow: from 1.200 to 2.400 l/min
Power: variable (typical value:5 Kw)
Settling tank: Integrated
Integrated tanks volume: 3000 litres (basic version)
Mechanical scraper: integrated, with prefilter 20-30 mm
Activation: automatic with sensors, no wind sensitive
Vehicles max. weight: 70 tons

Available options:

• Settling tank with mud extractor (from 16 to 40 m³)  • Polyelectrolyte dosing group with integrated tank  • Automatic water refill  • Auxiliary tank for mud storage  • Mud dewatering system  • Minimal instructions and obligation, interdiction and emergency signs  • Heavy Duty ramps  • Specific solution for Asbestos reduction  • Internal width extension (max 4 mt)  • Internal length extension (max 8 mt)  • Sidewalls height extension (max 5 mt)  • Orientable nozzles  • Rotating flow nozzles  • Central wash platform  • Back wash injectors  • Low, up and side wash injectors  • Sanitation and bacterial control  • Extra thin autocleaning filter  • Heating system  • Telemetry and telecontrol  • Current generator

CONTACT US TO DESIGN YOUR OWN SYSTEM FOR FREE